Contact Us

HEAD OFFICE

Add.: No. 6, Fengling Street, Economic Development Zone,

Liandu District, Lishui, Zhejiang, China   323000

Tel: +86 578 2951868
Fax: +86 578 2273800

E-mail:
yr@cnballscrew.com

 

Home > News > Content
How A Ball Screw Assembly Works ? Nov 20, 2017

A. The Ball Screw Assembly

The ball screw assembly consists of a screw and a nut, each with matching helical grooves, and balls which roll between these grooves providing the only contact between the nut and the screw. As the screw or nut rotates, the balls are deflected by the deflector into the ball return system of the nut and they travel through the return system to the opposite end of the ball nut in a continuous path. The balls then exit from the ball return system into the ball screw and nut thread raceways continuously to recirculate in a closed circuit.

 

B. The Ball Nut Assembly

The ball nut determines the load and life of the ball screw assembly. The ratio of the number of threads in the ball nut circuit to the number of threads on the ball screw determines how much sooner the ball nut will reach fatigue failure (wear out) than the ball screw will.

 

C. Ball Nuts Are Manufactured With Two Types of Ball Return Systems

(a) The External Ball Return System. In this type of return system, the ball is returned to the opposite end of the circuit through a ball return tube which protrudes above the outside diameter of the ball nut.
(b) The Internal Ball Return System (There are several variations of this type of return system) The ball is returned through or along the nut wall, but below the outside diameter.

D. Rotating Ball Nut Assembly

When a long ball screw rotates at high speed it can begin to vibrate once the slenderness ratio reaches the natural harmonics for that shaft size. This is called the critical speed and can be very detrimental to the life of a ball screw. The safe operating speed should not exceed 80% of the critical speed for the screw.