+86-578-2951868

Engineering Guide: Precision Grades & Preload Pairing

Sep 09, 2026

news-800-800

 

Selecting the proper ball screw requires matching the lead accuracy grade and manufacturing method to the machine's mechanical objectives.
1. Transportation Grades (C7, C10): Precision Rolled
Permissible Lead Error: C7 permits a lead deviation of ≤±50 μm (±0.05 mm) per 300 mm of travel.
Manufacturing Method: Screw threads are cold-rolled between precision cylindrical dies, followed by surface hardening and finish polishing.
Recommended Applications: Woodworking routers, plasma tables, 3D printers, packaging automation, and general material-handling slides where strict positional tolerances over long spans are not mandatory.
Commercial Advantage: High cost-efficiency, standardized lead times, and broad off-the-shelf availability.

 

2. Machine Tool Grades (C3, C5): Precision Ground
Permissible Lead Error: C5 specifies ≤±18 μm per 300 mm; C3 specifies ≤±8 μm per 300 mm.
Manufacturing Method: Screw blanks are induction-hardened, stress-relieved, and finish-ground on multi-axis CNC thread grinding machines.
Recommended Applications: Metal-cutting CNC milling centers, precision lathes, semiconductor inspection systems, and coordinate measuring machines (CMM).

 

3. Backlash and Preload Integration
Specifying a high-precision lead accuracy grade requires corresponding control over internal axial clearance:
C7 Assemblies: Typically paired with standard clearance single nuts (e.g., SFU/SFNU series) with axial play in the range of 0.02 to 0.05 mm.
C3/C5 Assemblies: Typically paired with preloaded nuts-such as DFU double-nut configurations or single nuts with calibrated oversized balls-to eliminate axial play and provide high axial stiffness during rapid direction reversals.

Send Inquiry